Walnut Composite Slatted Cladding Fascia Board 3.6m

Our Walnut Composite Slatted Cladding Fascia Board is designed to add a premium finishing touch to your cladding installation. It neatly conceals exposed edges and frames key areas of the façade, such as around windows, doors and along the perimeter of the cladded surface.

Each fascia board is approximately 3.6m in length, 14cm in width and 1cm in depth. The Walnut shade is specifically chosen to match our composite slatted cladding in the same colour, helping you achieve a rich, timber-inspired look with the benefits of modern composite materials.

Made from recycled wood fibres and plastic, this fascia board offers excellent durability, weather resistance and low maintenance, making it an ideal choice for both residential and commercial properties seeking a long-lasting, cohesive cladding finish.

Decide where Walnut fascia boards will be used to finish the cladding and carefully measure the lengths needed for each section.

Cut the fascia to size using appropriate cutting tools for composite products, ensuring straight, clean edges.

Position the fascia so that it is flush with the front of the slatted cladding and fully covers any visible or cut board edges.

Pre-drill fastening points along the top and bottom of the fascia, beginning roughly 80mm from the ends and spacing the remaining fixings at around 300mm intervals.

Secure the fascia by screwing through the face into a suitable backing or support structure, checking alignment regularly to keep the board level.

When joining two fascia boards together, leave a modest expansion gap of approximately 2mm to allow for movement and maintain a neat appearance over time.

Warranty periods and cover vary by product. Please contact Status Composite to confirm the applicable terms for this product before ordering.

Ask about this warranty