Red Brown Composite Slatted Cladding Fascia Board 3.6m

Our Red Brown Composite Slatted Cladding Fascia Board provides a smart, traditional finish for your cladding project. It is used to hide exposed or cut board edges and to create a tidy frame around windows, doors and the outer edges of the cladded area, helping to elevate the overall appearance of the façade.

The fascia board is approximately 3.6m in length, 14cm in width and 1cm in depth. Its Red Brown colour is designed to match our composite slatted cladding boards, delivering a warm, timber-inspired finish that works well with both classic and contemporary designs.

Manufactured from recycled wood fibres and plastic, this fascia board combines durability with low maintenance. It is suitable for a wide range of residential and commercial applications where a long-lasting, cohesive cladding finish is required.

Carefully plan where the Red Brown fascia boards will be fitted and take accurate measurements for each run.

Cut the fascia to length using suitable composite cutting tools, ensuring straight, smooth edges for neat joints.

Position the fascia board so that it sits flush with the front face of the slatted cladding and fully covers any uneven or cut edges.

Pre-drill holes along the top and bottom of the fascia, beginning around 80mm from the ends and spacing additional fixings at about 300mm centres.

Fix the fascia by screwing through the face into a solid backing or support structure, checking that the board remains level as you progress along its length.

When joining two fascia boards together, leave an expansion gap of roughly 2mm between the ends to accommodate movement and maintain a clean, long-lasting finish.