Complete Woodgrain Composite Fence Panel - 6ft High

The Complete Woodgrain Composite Fence Panel Kit – 6ft High is a full solution for creating a premium composite fencing panel with a realistic woodgrain finish and minimal ongoing maintenance. Each kit builds a 1.8m wide fence panel and includes the main structural components and slats required for a clean, consistent finish.

Included in every kit:
1 x 2.4m Post
1 x Black top & bottom rail
1 x Black top & bottom cap
12 x Slats (150mm high)
1 x Finishing Strip

To complete a run, you will usually need an Extra Post Kit to finish the end of the section or to extend onto additional panels.

Included in the Extra Post Kit:
1 x 2.4m Post
1 x Black top & bottom cap
1 x Finishing Strip

This system is ideal for modern gardens and outdoor spaces where you want the warmth of a timber look without the regular painting, staining or treatment. The slats stack neatly to create a solid panel appearance, and the woodgrain effect helps deliver a high-end look on a low-maintenance build.

Plan your run before ordering to confirm how many full panel kits and extra post kits you need for your total length and layout.

Plan your fence layout and mark out the positions for each 2.4m post, confirming where full panels and extra post kits will be used.

Dig post holes to a suitable depth and set each post plumb, then concrete in place and allow the footing to cure fully.

Fit the bottom rail and bottom cap components as per your kit, ensuring the rail is level before proceeding.

Insert the slats one at a time, stacking them to the required height and ensuring they sit neatly and consistently throughout the panel.

Fit the top rail once the final slat is installed, then secure everything and install the top cap to finish the panel.

Install the finishing strip to create a neat edge and lock the run into a clean, professional finish.

If extending the run, repeat the process and use an Extra Post Kit at the end of the final panel to complete the section neatly.