Co-Extrusion Composite Flat Fencing 15.7cm x 1.8m - Charcoal

Our Co-Extrusion Composite Flat Fencing Boards in Charcoal are a great choice for modern, design-led gardens. The deep charcoal tone and subtle woodgrain pattern provide a striking contrast against planting, paving and architectural features, while still capturing the feel of natural timber.

Each board measures approximately 15.7cm wide, 1.8m long and 2cm deep. The co-extruded cap layer is engineered to handle challenging weather conditions, improving resistance to UV rays, moisture and general wear. This construction helps reduce issues such as fading, warping and splintering that are common with traditional timber.

With six colour options in the range – Teak, Anthracite, Antique, Charcoal, Light Grey and Walnut – you can build a fence that fits seamlessly with your outdoor scheme. These boards are suitable for privacy fences, windbreaks and decorative screening around patios, gardens and commercial outdoor areas.

Set out the fence run and check all measurements, allowing for post centres and board coverage.

Install the posts securely in the ground, ensuring they are level and aligned along the full length of the fence.

Cut the Charcoal composite boards where required, following the manufacturer’s guidance for cutting composite materials.

Fix or slot the boards into the compatible post and rail system, working from the bottom upwards for consistency.

Allow suitable expansion gaps between boards or at the ends of the run, as recommended.

Finish with matching trims or caps to protect edges and give a clean, finished appearance.