Grey Composite Woodgrain Fascia Board 3.6m

Our Grey Composite Woodgrain Fascia Board is designed to complete the look of your composite decking by neatly finishing exposed edges and vertical faces. Each board measures approximately 3.6m in length, 14cm in width and 1cm in depth, making it ideal for cladding step risers, deck perimeters and raised platforms.

The fascia features a dual-sided design with a detailed woodgrain finish on one side and a more contemporary grooved profile on the other. This allows you to select the appearance that best suits your deck and surrounding landscaping. The Grey colour has been chosen to coordinate with our woodgrain composite decking boards, helping you create a cohesive, professional finish.

Manufactured from recycled wood fibres and plastic, these fascia boards provide a sustainable and cost-effective alternative to traditional timber. Like other uncapped composite products, they will go through a short initial weathering phase, gently lightening to a stable, natural tone before the colour settles for the long term.

Plan where the fascia boards will be installed and measure each section carefully.

Cut the fascia to length using appropriate tools, making sure the edges are clean and straight.

Offer the fascia board up to the deck edge or riser, checking that it sits flush with the top of the decking surface.

Pre-drill fixing points along the top and bottom edges of the fascia at regular intervals, starting around 80mm from each end.

Secure the fascia by screwing through the face into a suitable backing structure, maintaining even spacing between fixings (typically around 300mm).

Where two fascia boards meet, leave a small expansion gap of approximately 2mm to allow for movement, and repeat the process along the full perimeter.