Teak Composite Woodgrain Fascia Board 3.6m

Our Teak Composite Woodgrain Fascia Board is designed to give your decking project a warm, natural-looking finish while neatly concealing exposed edges and framework. Each board measures approximately 3.6m in length, 14cm in width and 1cm in depth, making it ideal for cladding the front of decks, step risers and raised platforms.

The fascia is dual-sided, with a detailed woodgrain effect on one face and a clean grooved profile on the other. This allows you to choose the appearance that best complements your composite decking and surrounding landscaping. The Teak tone is specifically selected to coordinate with our woodgrain decking boards for a cohesive, professional finish.

Made from recycled wood fibres and plastic, this fascia board offers a sustainable, low-maintenance alternative to traditional timber. Like all uncapped composite products, it will go through a short natural weathering phase, softly lightening to a more natural shade before stabilising. Once settled, it requires minimal upkeep, helping your deck perimeter stay smart for years to come.

Plan the fascia layout around your deck and carefully measure each section to determine the lengths required.

Cut the Teak fascia board to size using suitable tools for composite products, making sure all cuts are clean and straight.

Position the fascia against the deck edge or riser so that it sits flush with the top surface of the decking.

Pre-drill fixing holes along the top and bottom of the fascia, starting roughly 80mm from each end and continuing at approximately 300mm intervals.

Secure the fascia by screwing through the face into a solid backing structure or deck framing, checking that the board remains straight and tight to the surface.

When joining two fascia boards, leave an expansion gap of around 2mm to allow for natural movement, and repeat the process around the full perimeter of the deck.