Golden Oak Composite Slatted Cladding Fascia Board 3.6m

Our Golden Oak Composite Slatted Cladding Fascia Board is designed to complete your cladding installation with a warm, natural-looking finish. It is ideal for hiding exposed or cut edges and for framing key areas such as windows, doors and the outer perimeter of the façade.

Each fascia board is approximately 3.6m long, 14cm wide and 1cm deep. The Golden Oak colour is carefully selected to coordinate with our matching slatted cladding boards, helping you create a consistent, timber-style appearance across the entire elevation.

Made from a blend of recycled wood fibres and plastic, this fascia board offers a durable and low-maintenance alternative to traditional timber. It is engineered to cope with outdoor conditions, requiring only occasional cleaning to keep it looking smart year after year.

Plan where the Golden Oak fascia boards will be installed and measure each section carefully.

Cut the fascia to the required length using suitable tools for composite materials, ensuring the edges are clean and straight.

Offer the fascia board up to the cladding so that it finishes flush with the face of the slatted boards and neatly covers any exposed edges.

Pre-drill fixing points along the top and bottom of the fascia, starting around 80mm from each end and continuing at roughly 300mm intervals.

Secure the fascia by screwing through the face into a suitable backing structure, checking that the board remains level and tight to the surface as you work.

Where two fascia boards meet, leave a small expansion gap of approximately 2mm to allow for natural movement, then repeat the process around the full perimeter of the installation.