Black Composite Woodgrain Fascia Board 3.6m

Our Black Composite Woodgrain Fascia Board is the ideal way to give your composite decking a sharp, modern finish. Each board is approximately 3.6m long, 14cm wide and 1cm deep, making it suitable for finishing deck perimeters, concealing subframes and cladding step risers.

The board is reversible, with a natural woodgrain effect on one face and a clean grooved pattern on the other, so you can choose the style that best complements your decking and wider garden design. The Black shade is specifically selected to coordinate with our woodgrain composite decking range, helping you create a seamless, premium look.

Made from recycled wood fibres and plastic, this fascia board is an eco-conscious alternative to traditional timber that will not require regular staining or painting. As with other uncapped composites, the colour will gently change during the initial weathering period before stabilising, giving a long-lasting and attractive finish around your deck.

Measure each section of the deck where you plan to install fascia and mark the board accordingly.

Cut the fascia to the required length using suitable cutting tools for composite products.

Position the board against the deck edge or riser, ensuring it lines up neatly with the top of the decking.

Pre-drill fixing holes near the top and bottom edges at regular intervals, starting roughly 80mm from each end.

Fix the fascia in place by screwing through the face into a solid backing structure or framing, maintaining consistent spacing of around 300mm between fixings.

Leave a small expansion gap of about 2mm where fascia boards meet or at external corners to allow for minor movement.